Oakton Meters, pH , conductivity , pH Testr

Waterproof pH Testr™ Deluxe Kit

pH Testr™ Deluxe Kit

This kit contains everything you need including a meter, calibration solution pouches, sampling vial, instructions and storage case. Push-button calibration automatically adjusts readings to the buffer. Hold button allows the unit to maintain the reading until it can be logged. Auto-off turns unit off after 8.5 minutes of nonuse to conserve batteries.
Self-diagnostic error messages warn of low batteries, over/under range conditions or incorrect calibration point. The Waterproof Testr is fully waterproof and dustproof for added margin of safety, and has a replaceable electrode.

Waterproof Double Junction pH Testr
The pH tester for harsh applications
The double junction electrode design and increased reference gel volume allow for
significantly longer electrode life, especially in harsh applications like plate
chemistry, activator and stabilizer. Same features as the Waterproof pH Testr above.
(Not pictured)

Part Number	Description	Price
MIS-PHKWDJ	Double Junction pH Meter, Waterproof, Kit	$118.70
MIS-PHREDJ	Replacement electrode for Double Junction Waterproof Tester	$63.20
MIS-PHRE	Replacement electrode for Waterproof Tester	$40.85

Continuous Monitoring Kit ( Fountain Solution)

Microprocessor-based real time monitoring of fountain solution in continous dampening units.

Now you can instantly know your fountain solution temperature, pH and conductivity at a glance. Two probes connect to the monitors for constant digital readout.

Two SPDT set point relays per monitor (pH and Conductivity) can be used to activate replenishment pumps, valves or alarms.
All push-button operation with large LED displays
Three-point pH calibration; one point conductivity calibration
Automatic temperature compensation (ATC)
Available with either in-line probes or submersible probes.

1 year warranty

Continuous In-line Kit - MIS-CMKIL = Call for price
Continuous Submersible Kit - MIS-CMKS = Call fro price

Conductivity Measurement
Maximum quality control necessitates frequent conductivity readings for the fountain solution. Contamination from paper coatings, in and spray powder often cannot be determined and pH readings. Only conductivity monitoring pin-points problems before they can occur.

Waterproof Conductivity Testr ™
Microprocessor-based Deluxe Kit

These tester offer ± 1% full scale accuracy
the Waterproof Conductivity Testr is fully waterproof and dustproof for a margin of safety. It has the added speed and convenience of a microprocessor.

Replaceable electrode
Automatic Temperature Compensation (ATC)
Features 1 point push button calibration hold button, self-diagnostic error messages, and auto-shutoff after 8.5 minutes.
Full scale LCD read-out fro faster easier reading.
Available in two models for different types of water.

Conductivity Testr™ Dual Range

Use one Tester while taking reading over a wide range of water purities

Automatic Temperature Compensation (ATC)
Accuracy of ± 2%
Features 2-point push button calibration, hold button, self diagnostic error messages, and auto-shutoff after 8.5 seconds.

MIS-CONKWD	Meter Deluxe Kit, Dual Range, Water Proof	$123.20
MIS-WPCC	Waterproof Testr Carrying Case, Single	$28.75
MIS-CONWRE	Replacement Electrode, High Range	$49.30

pH Calibration Pouches

pH Calibration Pouches

With these pouches, there is no need to wait for tablets to dissolve. Each single-use pouch is filled with 20ml of fresh premixed calibration solution or rinse water ready-to-use. 20 pouches per box.

Part Number	Description	Price
MIS-PHCP4	Calibration Pouches (4.01 pH range)	$26.80
MIS-PHCP7	Calibration Pouches (7.00 pH range)	$26.80
MIS-PHCP10	Calibration Pouches (10.00 pH range)	$26.80
MIS-PHCPA	pH Sample Assortment - 4.0, 7.0, 10.00	$26.80
MIS-PHCPR	Rinse Water Pouches	$26.80
MIS-CONCP1413	Calibration Pouches 1413 µmhos (20/box)	$26.80
MIS-CONCP15000	Calibration Pouches 15,000 µmhos (20 box)	$26.80

Price do not include shipping
All major credit cards accepted
Revised May, 2008